
As a rule, the rated diameter must be selected so that the exterior diamter of the pipe inserted into the part is at about the middle of the clamp tightening range.
Width | Diametrer | Stainless |
3 mm | from 2,9 to 3,5 mm | 304 |
4 mm | from 3,3 to 6,6 mm | 304 |
5 mm | from 6,1 to 8,7 mm | 304 |
6 mm | from 7,5 to 19,5 mm | 304 |
7 mm | from 17,7 to 30,7 mm | 304 |